KASCO 4400JF
Floating Fountain
[view
large image]
Cypress
Fountain Nozzle
7.5' Tall
x 25' Wide Arch
[view
large image]
Juniper
Fountain Nozzle
4' Tall
x 27' Wide "V"
[view
large image]
Linden
Fountain Nozzle
8' x 25'
Wide Two Tier
[view
large image]
Sequoia
Fountain Nozzle
10' Tall
x 6' Wide Geyser
[view
large image]
Willow
Fountain Nozzle
6' Tall
x 23' Wide "V"
 |
2-year
manufacturer's limited warranty |
 |
MUST
be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet ! |
 |
No one
should ever enter the water with electrical equipment in operation or even
plugged into the control panel or outlet. It is essential that the GFCI
breaker is tested once a month to ensure proper operation. Check instructions
for procedure. |
 |
Not approved
for use in swimming pools |
 |
Ships from
Oklahoma |
To view this file you need Adobe Acrobat Reader 4.0 or higher. If you do
not already have Adobe Acrobat Reader installed on your computer, please
click on the Adobe logo to download it free of charge.
|
|
[view
large
image]
4400JF
with Cypress Fountain Nozzle |
Kasco
Marine proudly introduces the new 4400JF model. This highly requested unit
is perfect for medium size ponds and when multiple fountain patterns and
pattern heights are desired. |
| It
includes 5 interchangeable nozzles to give you 5 FOUNTAIN PATTERNS FOR
THE PRICE OF ONE! |
|
[view
large image]
4400JF
with Linden Fountain Nozzle |
The
5 fountain patterns range from 4 ft. in height to 27 ft. in diameter. With
5 multiple fountain patterns, you have the freedom to adjust the aerating
fountain to fit your pond, weather conditions, and your tastes. |
| Kasco's
4400JF Floating Aerating Fountain does a great job at adding oxygen and
improving your pond or lake aeration. |
|
[view
large image]
4400JF
with Willow Fountain Nozzle |
The
4400JF Floating Aerating Fountain comes with two mooring ropes and a choice
of 50 ft., 100 ft., 150 ft. or 200 ft. power cord. Also available in a
240 V option. Lights are available separately. |
Add
an optional LR-375 Low Voltage Light Kit to the 4400JF to extend its beauty
into the nighttime hours. Lighting enlivens the water display, turning
water drops into glimmering jewels of light while providing an overall
resort-like appearance to your water feature.
The LR-375 Low Voltage Light Kit includes three machined-bronze light fixtures,
each with 75 watt MR-16 Halogen lamps. The lighting kit’s transformer is
integrated into the system, so there’s no extra wiring required. Simply
plug it into the control panel and the lights will operate whenever the
unit operates during darkness. Three clear MR-16 lamps are included with
each kit. As an option, you can choose any or all of the optional colors
of red, green, blue and yellow.
Optional
Lighting Package (order separately below)
|
|
The 4400JF includes
a GFCI protected control box. The C-25, 120 V control with timer, GFCI
protection, and photo eye for light operation comes standard. The photo
eye allows you to set your timer for the hours of operation and when it
is dark the lights will activate. No electrician is required to install
the C-25 Control or the 4400JF if an existing 120 V, 15 amp receptacle
is available.
Control
Panel |
 |
Multiple
Patterns in One Unit: Custom-configure the unit to the exact project needs
and your personal tastes |
 |
Efficient
/ Low Power Use: Highest efficiency design for low power consumption versus
competing units - reduces operating costs over the entire life of the unit
- 11 running amps on 120 V circuits for low operating costs |
 |
Clog Resistant:
Unique water-deflecting nozzle design gives you the most clog-resistant
model on the market - Successful shallow water operation in as little as
19 inches |
 |
Rugged
Motor: Environmentally friendly design with a hard-face internal mechanical
seal and external lip seal for protection against leaks - seals are silicone
carbide for long life - long-life top and bottom ball bearings - flood
oil lubricated for excellent heat dissipation |
 |
Corrosion
Resistant: Superior dependability in salt-water or other corrosive environments
- all external metal motor, float, and hardware components are of stainless
steel composition and protected by a sacrificial zinc anode |
 |
Low Maintenance:
Clean the motor housing once or twice per year and replace the sacrificial
zinc anode when visibly corroded |
 |
Fully Tested:
ETL listed to stringent UL and CSA Safety Standards |
 |
Ships Easily:
4400JF ships in 2 or 3 boxes via UPS (add 1 box for lights) |
 |
Choice
of Cord Lengths: SJTOW underwater rated power cord length options of 50',
100', 150', or 200' |
 |
Includes
two 50' braided nylon mooring ropes |
 |
Made in
the U.S.A. |
|