KASCO 7.3JF
Floating Fountain
[view
large image]
Linden
Fountain Nozzle
24' Tall
x 28' Wide Two Tier
[view large
image]
Sequoia
Fountain Nozzle
26' Tall
x 10' Wide Geyser
[view large
image]
Birch Fountain
Display (No Nozzle)
14.5' Tall
x 13' Wide Geyser
 |
3-year
manufacturer's limited warranty |
|
Kasco
recommends a licensed electrician to install the Control Panel and the
wiring on the 7.3JF to hard-wire the Floating Aerating Fountain into the
Control Panel |
|
No one
should ever enter the water with electrical equipment in operation or even
plugged into the control panel or outlet. It is essential that the GFCI
breaker is tested once a month to ensure proper operation. Check instructions
for procedure. |
|
Not approved
for use in swimming pools |
|
Ships from
Oklahoma |
To view this file you need Adobe Acrobat Reader 4.0 or higher. If you do
not already have Adobe Acrobat Reader installed on your computer, please
click on the Adobe logo to download it free of charge.
|
|
[view
large image] |
Kasco
Marine's NEW 7.3JF, 3 Phase, 7.3 hp Floating Aerating Fountain provides
the power needed to adequately aerate larger ponds and provide eye-catching
decorative displays. |
| Each
7.3JF is supplied with 2 different interchangeable nozzles, providing you
with the versatility of 3 different patterns for displays of up to 26 feet
in height or 28 foot in diameter. You can easily change nozzles to fit
the specific pond dimensions, wind conditions and the desired aesthetic
effect. |
|
| The
7.3JF, 3 phase unit is supplied with a simple to use, all inclusive GFI
protected 3 phase control panel, model CF-3075. Without the confusing options,
these panels include all the best features. Included in this UL-508A, non-metallic
4x/3r panel is a true, 3 phase rated personnel protection GFI with a 5ma
trip level. Also included is a motor starter with adjustable overload,
lightning/surge protection, two 24 Hour time clocks (one for the unit and
one for lights), and a Hand-Off-Auto switch. Other features are an angled
field wiring terminal block for easy installation, input terminals for
field installed interlock, and startup instructions with wiring diagram
in the door. Kasco recommends a licensed electrician to install the
Control Panel and the wiring on the 7.3JF to hard-wire the Floating Aerating
Fountain into the Control Panel. |
|
Optional
Lighting Package (order separately below) |
Add a LR-375 Low Voltage
Light Kit to the 7.3JF to extend its beauty into the nighttime hours. Lighting
enlivens the water display, turning water drops into a glimmering jewels
of light while providing a resort-like appearance to the water feature.
The LR-375 Low Voltage Light Kit
includes three machined-bronze light fixtures each with 75 watt MR-16 Halogen
lamps. The lighting kit’s transformer is integrated into the system, so
there’s no extra wiring required. Simply plug it into the C-85 Control
Panel and the lights will operate whenever the unit operates during darkness.
Three clear MR-16 lamps are included with each kit. As an option, you can
choose any or all of the optional colors of Red, Green, Blue & Yellow.
Two sets of LR375 lights can be added for more dramatic displays. |
|
Multiple
Patterns in One Unit: Custom-configure the unit to the exact project needs
and your personal tastes |
|
Efficient
/ Low Power Use: Highest efficiency design for low power consumption versus
competing units - reduces operating costs over the entire life of the unit
- 20 running amps on a 240 V, 3 phase circuit for low operating costs |
|
Clog Resistant:
Unique water-deflecting nozzle design gives you the most clog-resistant
model on the market - successful shallow water operation in as little as
28 inches |
|
Rugged
Motor: Environmentally friendly design with a hard-face internal mechanical
seal and external lip seal for protection against leaks - seals are silicone
carbide for long life - long-life top and bottom ball bearings - flood
oil lubricated for excellent heat dissipation |
|
Corrosion
Resistant: Superior dependability in salt-water or other corrosive environments
- all external metal motor, float, and hardware components are of stainless
steel composition and protected by a sacrificial zinc anode |
|
Low Maintenance:
Clean the motor housing once or twice per year and replace the sacrificial
zinc anode when visibly corroded |
|
Fully Tested:
ETL listed to stringent UL and CSA Safety Standards |
|
Ships Easily:
Via UPS in 4 or 5 boxes (add 1 box for lights) |
|
Choice
of Cord Lengths: SJTOW or SOOW underwater rated power cord length options
of 100', 150', 200', 250', 300', or 400' |
|
Includes
three 50' braided nylon mooring ropes |
|
Made in
the U.S.A. |
|
| Contact Us
| Product Catalog
| Search
| Shipping & Handling
| Warranty/Returns
| Pond Planner
| Check
Out
...
...
![[view large image]](ka840lil.jpg){kind=link}